It is a definite thing that you will find some road bumps on the roads and streets whether natural or industrial bumps where you will find some people make many random bumps that not identical to the international measurements and specifications in order to reduce the speed of cars which expose the cars to many losses and damages, and there are two types of bumps:
1) High bump:
This kind of bumps is usually visible to the driver while driving during the day and could be avoided rather than the low bump.
2) Low bump:
This kind of bumps is difficult to avoid where the losses of cars with this kind are larger than the high bumps. The losses of cars caused by all the kinds of bumps can be determined by the following:
– Make and model of the car whether modern or old.
– The speed of the car at the moment of crossing the bump.
– Carload during crossing the bump.
– The condition of car’s assistants, zippers and tires.
– The amount of increase or decrease for the bump and its size.
The losses of any car after crossing the bump are:
1) Disintegration of the nuts and bolts that install all the car’s parts.
2) Breaking the assistants or zippers of the car, or both.
3) Breaking one of the scissors in the car.
4) Breaking in the devices that work on the car’s directions plus the steering wheel device.
5) Breaking in the balance’s device of the car.
6) Occurrence of warp in the front longitudinal or incidental or rear device of the car.
7) Damage in the engine rules or gearbox, tires or the rims.
8) Damage in the exhausting system.
9) Damage in the steering wheel box and the front or back suspension system.
10) Breaking any part of the lower parts in the car such as engine or gearbox or radiator.
11) Deflection of the balance’s angles of the car.
The maintenance engineers advise drivers during crossing the natural or industrial bumps to do the following:
– Cross any bump at the lowest possible speed to maintain the car parts.
– In case of several bumps, you have to check the car’s parts right away and tightening the parts very well.
– Adjust the tires’ pressure and adjust the balance of the car.
– Adjust the tires’ balance.
The road’s specialists such do the following:
1) Putting phosphorous warning signs before any bump with sufficient distance.
2) Painting the bumps with phosphorous colors to be visible at night.
3) Removing the sudden bumps in highways.
